Attention valued customers...
To request information on any items, pricing or for technical assistance, click on the link below to forward your request.
REQUEST INFORMATION FORM
2 Axis Synchronization and Motion Controllers
The BY340 and 641 are stand alone high performance low cost motion controllers specifically designed for 2 axis synchronization for speed and position. The BY340 monitors the speed and phase of the master drive/motor and controls the corresponding speed and phase of the slave drive/motor. The display can show the speed of the machinery or conveyer eliminating the need for a separate HMI. Setup is easy using the free operating software or the front panel. Applications include transfer conveyers, bottling applications, punching, printing, etc. The BY340 synchronous controller with its compact 96 x 48 x 140 millimeter (3.78 x 1.89 x 5.51") DIN housing is suitable for small panel installation as well as small machinery installation because of the low price. The BY340 allows the speed ratio via keypad and has a ± 10 V or 0/4 to 20 mA analog output, 4 programmable limit values for transistor switching outputs as well as a serial RS232 interface. The precision single-axis controllers of the BY series have excellent control characteristics and are suitable for use on speed-controlled drives with analog setpoints. It provides angle or ratio synchronization with adjustable transmission factors and phase positions as well as trimming and indexing functions for adjusting the relative position between the axes are just some of the numerous available functions and features of these devices. On the fly phase adjustments and trimming can be done using the front panel.
The BY641 allows speed ratios to be changed using the thumbwheel switches. Addtionally, the 641 provides 4 relay outputs in addition to the high speed transistor outputs.
CLICK HERE FOR VIDEO
1 - 4 AXES CONTROLLER CASCADABLE FOR ADDITIONAL AXES.
In addition to the standard application as a multi-axis synchronizer, this controller is suitable especially for control tasks of motion profiles with flying material processing and for numerous movements of printing machines, packaging machines and winding equipment.
NEW 2 AXIS MOTION CONTROLLER.
The next generation motion controller with firmware is suitable for various applications of drive technology, e.g.: Rotating Cross Cutter Control, Flying Saw control, Eccentric Shear Control, Synchronization Control, Index and Print Mark Evaluation Control, Label Printing Machine Control, etc. Tandem Drive Control New included control loop enables it to run torque loop applications Inputs include incremental encoder, sin / cos, SSI, Sin/Cos, Digital inputs etc.
Optional IO modules are available e.g. CANopen, CC-Link, DeviceNet, EtherCAT, Modbus TCP, PROFIBUS, PROFINET, SERCOS-III, etc.
Firmware for Flying Shear, Saw, Rotating Cutters, Cut to Length and Printing roll.