Attention valued customers...
To request information on any items, pricing or for technical assistance, click on the link below to forward your request.
REQUEST INFORMATION FORM
Cut control for extrusions using straight cut, flying shears and rotating cutters
High Performance Low Cost Controller for Rotating Sealers, Cutters, Punchers and Printing Rolls
The CT340 / CT641 have been designed for maximum efficiency and accuracy, with minimum stress for all mechanical parts for rotating systems. Very short control cycles together with intelligent motion profiles provide excellent performance under all operating conditions.
The units are very easy to set up. All settings can be made either by keypad and display at the unit or by PC, with use of the free Motrona operator software.
All relevant operational parameters and variables are accessible by RS232/RS485 interface. For PROFIBUS applications, our PB251 gateway is available. The user has multiple possibilities for remote control of all batch and cutting parameters via operator terminals, PC or PLC systems.
Flying Shear & Traveling Saw Controllers
The basic operation of "Flying Shears / Traveling Saws" is that a carriage with a cutting tool follows synchronously the material while the cut is in progress, and then returns to a home position, to wait for the next cut. The FS340 / FS641 are suitable for control of "Flying Shears" and "Flying Saws" frequently used for cut-to-length in continuous motion applications,
The FS340 / FS641 is designed for the special requirements of flying shear systems, with consideration for maximum efficiency and accuracy, with minimum stress for all mechanical parts. Very short control cycles together with intelligent motion profiles provide excellent performance under all operating conditions.
This unit is very easy to set up. All settings can be made either by keypad and display at the unit or by PC, with use of the free Motrona Operator software. Optional Profibus communication is available.
Connectric Length Measurement & Control System is a versatile, accurate and economical stand alone length measurement and control system for old and new machinery. It is ideal for cut to length, repeat cut to length, batch control, total length per shift etc. and minimizes operator intervention. It is easy to install and interface with existing machinery.
It is customized to meet your specific application needs.
1 - 4 AXES CONTROLLER CASCADABLE FOR ADDITIONAL AXES.
In addition to the standard application as a multi-axis synchronizer, this controller is suitable especially for control tasks of motion profiles with flying material processing and for numerous movements of printing machines, packaging machines and winding equipment.
NEW 2 AXIS MOTION CONTROLLER.
The next generation motion controller with firmware is suitable for various applications of drive technology, e.g.: Rotating Cross Cutter Control, Flying Saw control, Eccentric Shear Control, Synchronization Control, Index and Print Mark Evaluation Control, Label Printing Machine Control, etc. Tandem Drive Control New included control loop enables it to run torque loop applications Inputs include incremental encoder, sin / cos, SSI, Sin/Cos, Digital inputs etc.
Optional IO modules are available e.g. CANopen, CC-Link, DeviceNet, EtherCAT, Modbus TCP, PROFIBUS, PROFINET, SERCOS-III, etc.
Firmware for Flying Shear, Saw, Rotating Cutters, Cut to Length and Printing roll.