Fiber Optic Data Transmission for encoder and sensor signals over electrically noisy, explosive areas or long distances

Connectric Application Tips and Advice

Fiber Optic Data Transmission for encoder and sensor signals over electrically noisy, explosive areas or long distances

Signals transmitted over fiber optic cable are immune to electrical noise, and are well suited for explosive areas.

Maintaining the ground reference potential over long distances is difficult, sometimes leading to erroneous results. The fiber optic transmitters and receivers could be the answer. The Motrona fiber optic transmitters can transmit signals over 2,000 or 3,000 meters with isolated ground potential between the transmitters and receivers. Simply use the ground potential on the receiver side to ensure error free signals which replicate the transmitting signals.

The Motrona LW213 / LW 214 and LW215 / LW216 are used for incremental and sensor (PNP) signals while the LW217 / LW218 are used for SSI signals.

Click here for specifications of the LW213 / LW214 / LW215 / LW216

Click here for specifications of the LW217 / LW218.

| Return

DATA LOGGING OF PROCESS ANALOGUE SIGNALS 8/27/2019
SSI / ABSOLUTE ENCODER SPLITTER 9/27/2018
EASY 2 AXIS SPEED AND PHASE SYNCHRONIZATION BY340 / BY641 12/31/2019
FAILSAFE E-STOPS 5/29/2015
NEW !! SIMULTANEOUS DISPLAY AND CONTROL OF POSITION & SPEED ON A SINGLE DISPLAY WITHOUT THE NEED OF A PLC AND HMI. 1/26/2023
Easy Single Axis Position Controllers for Low-Cost Solutions PS340 / PS641 1/3/2020

Search for Tips and Advice

Connectric Systems Inc. | Industrial electrical and electronic products

Connectric Systems Inc. has been providing products and solutions for the automation and control industries since 1976. Working closely with OEMS and end users large and small, we provide solutions to meet specific customer needs.