Catalogue

STANDARD FEATURES INCLUDE:

• V/Hz and Vector Control (VVW)

• Single and Three-phase input voltage 200-240V, 380-480V or 500-600V input voltage
• 150% current overload capacity
• 2.5 / 5 / 10 / 15 kHz adjustable switching Frequency
• Built in HMI
• Built in PLC using WLP Software
• Four isolated programmable digital inputs
• One isolated programmable analog input
• One digital relay output
• One digital transistor output
• One isolated programmable analog output
• RS-485 / Modbus RTU communication
• Protective features: Overcurrent, motor overload, drive over temperature, output phase-to-phase and phase-to-ground short circuit, DC bus over and under voltage and external fault
• Control features: Linear and "S" ramp acceleration and deceleration, local/remote control, DC  braking, torque boost, motor slip compensation, electronic pot, preset speeds, adjustable V/Hz profle, maximum and minimum adjustable frequency limits, two skip frequencies, adjustable output current limit, JOG, ride-thru, fying start and PID regulator.
• Display readings: Programmable main, secondary and Bar displays for Motor speed, frequency, voltage, current, etc. • Ambient: 32ºF (0ºC) to 122ºF (50ºC) without RFI flter, 104ºF (40ºC) with RFI filter, 

OPTIONAL FEATURES INCLUDE

• 9 I/O Modules for expansion and communications
• Up to 8 Digital Inputs, 4 Digital Outputs, 3 Analog Inputs, and/or 2 Analog Outputs available
• RS232, RS485, CANopen/DeviceNet, Profbus DP & DP-V1, Modbus TCP, Profnet I/O, Ethernet I/P available
• Dynamic Braking capabilities available
• Remote Keypad
• Flash memory module for program copy function
• RFI Filter